1 bar boost on a GT3071R = slipping OEM clutch

I need a new one and has done some searching around for different alternatives.
I might as well get me a new flywheel as the cost of resurfacing the OEM will probably cost me 2/3rds of a new lighter one.

My alternatives are as follows:

- ACT. On my first MX5 I had the old FM happy meal. ACT clutch and fidanza fly wheel.
This worked ok but the pressure plate made the pedal very firm. Also the 9 kg flywheel made it very hard to tune the Link ECU on tip inn at low revs. I would like to try something else this time as the firm pedal can be annoying and it puts a lot of load on the thrust bearing.

- New FM level 2 clutch. This unit promises 353 ft/lb and a slighty firmer pedal than stock.
Their steel flywheel weighs 4.7 kg. http://www.flyinmiata.com/index.php?deptid=4531&parentid=0&stocknumber=08-36000

- SPEC. http://www.lmperformance.com/51583/94.html. Don't know much about them.

- 949racing Twin Disc Race Clutch. http://www.949racing.com/index.asp?PageAction=VIEWPROD&ProdID=197
Tilton clutch with integrated skeleton flywheel. Ultralight and can probably withstand anything you throw at it. Costs $1030 which is about $400 more than other brands. Probably the best clutch for the Miata but too much $$$ for me.

- Exedy. http://www.exedyusa.com/race/ Looks to have the usual stuff + twin disc setups.
Exedy makes most OEM clutches for japanese cars. I would not be surprised if both ACT and SPEC uses exedy components.


I will probably buy the new FM happymeal. If it holds as well as the ACT and has a lighter pedal feel I'll be happy.