Boundary Engineering high flow oil pump

I took some comparison shots of the blue printed Boundary Engineering oil pump while putting it on the engine.<div>This is fitted with their billet oil pump gears which . I thought buying the hole pump was a good idea so I would know that the gears was properly put together and shimmed correctly.</div><div>
</div><div>On the outside the pump looks the same as the OEM MSM except for not having a tapped hole for the crank sensor and a different part number I can’t see any signs of porting from the outside. Hopefully the have fitted a stiffer spring to the relive valve (Or else I have paid $$$ for some fancy gears in an OEM housing)</div><div>
</div><div></div><div></div><div>
</div><div>The crank trigger wouldn’t fit without grinding of the tab behind the flywheel and tapping the an existing hole for the M6 bolt.</div><div></div><div>
</div><div>Nice to know that the OEM gears won’t fail on me as this is a weak point in the BP engine.</div>

Comments

comments powered by Disqus