Testfitting the WG return.

Here is how the WG return ended up looking.<div>No point in takeing pictuarez after installation as everything is hidden under the turbine.</div><div><div></div><div>
</div><div>Since the pipes are 38mm OD and the flexpipe has 40mm ID I had to space it out with a 1mm thick 40 mm OD pipe I found at Torshovbil.no. It was so tight I had to heat the parts up to get them to fit. I will be using a couple of T-bolt clamps to press the flex hose to the flanges with no cuts. Clamps will hopefully do fine as the flex hose is not stressed in any way.</div><div>
</div><div>
</div></div>

Comments

comments powered by Disqus