DIY wheel ramps for lowered MX-5

Jacking up a lowered car can be a pain since there is no room to get a hydraulic jack under the crossmember/diff.
<div>My 90 NOK solution.</div><div class="separator" style="clear: both; text-align: center;"></div><div>
</div><div>200mm wide 50mm thick .  First section 450mm and the second section 150mm.  This way it will clear the wind deflectors that are about 50mm off ground.</div><div>
</div><div>This have already saved me a lot of time as I have been messing with the brakes and switched wheels a lot lately.
<div class="separator" style="clear: both; text-align: center;"></div>
</div>

Comments

comments powered by Disqus