It took Adrenaline 14 days to actually ship the parts. Other than that everything went smooth. The rotors are from www.centricparts.comNothing fancy but they looks to be at least as...
To free up some space in the garage I decided to put together the springs and dampers.I didn’t find any instructions on which spring to use where.After som searching on...
I found out that an industrial strength vise requires an industrial amount of money…I refuse to spend 2500,- NOK for a basic tool consisting of 3 moving parts…Luckily the Biltema...
"The second generation of FM springs ": http://www.flyinmiata.com/news/springs.php How typical....I'm sure I was the one ordering the last batch...I have no problems with the KYB AgX but I would have...
I received this thing in the mail the other day.It might be useless as it was $30 on eBay.As long as it's not worse than the standard shifter I'm happy....
Changing the bushings is hard work! It's unbelivable how tight they are fitted into the suspension arms. Here is a pic of the old and new bushing:It took some brainwork...
While working on the suspension I noticed that my brak pads and rotors has seen better days. The rear EBC Greenstuff pads was totally shot and the left rear rotor...
Yeah! I have finally got the car up on jackstands and started to work on the suspension. <div>The plan:- Change all suspension bushings including swaybar endlink bushings- Change springs and...
New steering wheel: $40 including boss from ebay… $30 more for shipping to Norway.For that price I can live with the Swiss logo in the center, LOLThe quality is better...
I got some more stuff today:KYB AGX, Innovate LC1 WBO2 and an A'pexi airfilter from www.horsepowerfreaks.com. Great service, fast delivery and lots of tuning parts to choose from.The A'PEXi filter...
Dataloglab rocks!I just came home from a tuningsession and did some datalogs as well. Here is a pic of a 1-3rd gear WOT run:It's pretty clear that I need some...
I finally got around to install the Link ECU and new injectors.A lot of work but no problems as the installation manual from FM is the best. At least that’s...
I recently found out that members of the local MX5/Miata Club can get a discount on Simons exhaust system from http://www.auto-supply.no/ . I decided to buy the single tip version.The...
Today I received and fitted the oil-lines from FM. Great stuff and service.Perfect fit and no more oil leak. <p>Finally I can start using my turbocharged MX-5 !</p><p>I have also...
I got the O-ring for the injector replaced today but it turned out that I still has an oilleak. I tried tightening up the fittings but it only got worse....
The manifold with the turbo and downpipe boltet right on.I was a little worried that it might be some issues with the steering rack as MX5Parts had never fittet this...
This is how it looked before I started ripping out things from the engine bay: Nice and not so clean... I started with removing the airfilterbox and the manifold. No...
Last night I started installing the electronics, fuelfilter and the testpipe as these were fairly simple stuff that did not require the car to be left overnight at the "garage"....
